Machtric S2100S IP65 Wall-Mounted Vector Control | RFQ Sourcing Details

The Machtric S2100S is an IP65-rated, wall-mounted variable frequency drive designed for adjustable-frequency motor control. The listed control methods are V/F control and space-vector control, with PWM switching and an AC-DC-AC main-circuit topology. Available configurations are described for 220 V and 380 V supplies.

Supported electrical details include a rated input frequency of 50–60 Hz, a 170–240 V input range for 220 V versions, and a 330–440 V input range for 380 V versions. Corresponding output-voltage ranges are listed as 0–220 V and 0–380 V.

The output-frequency range is 0.10–400.0 Hz, with 0.01 Hz digital setting resolution. Analog setting resolution is listed as 0.1% of the maximum output frequency, while output-frequency accuracy is stated as 0.01 Hz. The drive supports configurable V/F curves for different load requirements.

Torque-related settings include automatic torque increase based on load condition and manual adjustment from 0.0% to 20%.

Eight multifunction input terminals are listed for functions such as fifteen-section speed control, programmed running, four-section acceleration/deceleration switching, UP/DOWN control, and emergency stop.

Three multifunction output terminals can indicate conditions including running, zero speed, counter status, external abnormality, program operation, and warnings.

Operating information can include frequency settings, output frequency and current, DC-bus voltage, temperature, operating status, alarms, and interactive guidance.

Other listed functions include a built-in PID controller, a simple PLC function, an RFI filter, and an EPM plug-in memory module for storing and transferring drive settings. An integrated isolator is described as version-dependent.

The stated overload capacity is 200%, but buyers should confirm the applicable duration and operating conditions before sizing the drive. For procurement, confirm the exact input phase, rated voltage, motor power, motor current, required output phase, enclosure arrangement, and full model suffix.

The listed power ranges are 0.4–3.7 kW for 220 V single-/three-phase versions and 0.75–18.5 kW for 380 V three-phase versions.

Also verify whether the selected unit includes the integrated isolator, which fieldbus option is required, and whether the built-in RFI filter meets the installation’s electrical-noise requirements.

Confirm load type, overload duty, ambient conditions, motor-cable length, control-terminal allocation, braking requirements, and any required external protection.

The source lists pump, water-working, general-purpose, single-phase-transducer, three-phase-transducer, and high-performance-transducer applications, but suitability for a specific machine or motor should be established from the selected configuration and project requirements.