High-Power Permanent-Magnet Brushless DC Motor, 2 | RFQ Sourcing Details
Servo Motors · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Servo Motors. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This high-power permanent-magnet brushless DC motor is offered in a stated configuration range of 0.5–12 kW, 24–120 VDC, and 1–100 N·m load torque. The described S1 working-system range reaches a maximum of 12 kW. The motor has four poles, an open-type casing, Class F insulation, and stated IP68 protection.
Listed design features include Nd. Fe35 permanent-magnet material, optimized winding overhang, low noise and vibration, high torque, fast dynamic response, a wide speed range, and overload capability. Standard cooling is described as a fan mounted at the motor tail.
Water cooling can be configured according to project requirements. Installation choices include B3 horizontal mounting, B5 vertical flange mounting, B35 vertical-horizontal mounting, and B14 or B34 arrangements. A multifunction controller is included, while CAN functionality requires additional customization.
Remote control and synchronous-control functions are also listed. The source information contains multiple example configurations rather than one fully reconciled build. One specification set identifies model BL90 at 1,200 W, 24 VDC, 2,800 rpm, and 150 A maximum current.
Another identifies model BL-180 at 3,000 rpm, 20 N·m, and 10–30 A continuous current. The product title also references 1,500 rpm, 24/48 V, 1/10 kW, and a worm-gear arrangement, but no gearbox ratio or output-shaft specification is supplied.
Buyers should therefore obtain a configuration-specific datasheet and drawing before ordering.
For procurement, confirm the exact model, rated and peak power, voltage, speed under load, continuous and peak current, continuous and peak torque, duty cycle, controller functions, cooling method, mounting arrangement, shaft interface, connector layout, and enclosure details.
If a worm gearbox is required, confirm whether it is included and obtain its ratio, output speed, rated output torque, backlash, orientation, and dimensions.
Also request confirmation of certification applicability, test documentation, package contents, inspection criteria, warranty terms, production lead time, and shipping arrangements for the selected build.
High-Power | Applications and Buyer Notes
High-Power is organized as a sourcing-ready Servo Motors reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Servo MotorsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Noise
- 50 dB statedBased on visible page data; confirm exact value in the RFQ.
- Cooling
- Tail-mounted fan;water c ing available by customizationBased on visible page data; confirm exact value in the RFQ.
- Motor type
- Permanent-magnet brushless DC motorBased on visible page data; confirm exact value in the RFQ.
- Power range
- 0.5–12 kW stated rangeBased on visible page data; confirm exact value in the RFQ.
- Package size
- 20 × 20 × 30 cmBased on visible page data; confirm exact value in the RFQ.
- Service life
- 5,000 hours statedBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 15 Kw 20 Hp Three Phase Squirrel Cage Asynchronous Ac MotorThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Bearings And Linear Motion categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Couplings Chains And Belts categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Gearboxes And Reducers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Motors And Drives categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Gearbox Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16mm High Precision Small Planetary Gearbox For Brushed Brushless Stepper Motors Gear Motor And ElThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Motor Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Linear Motion Parts Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 280 Kw Three Phase Squirrel Cage Asynchronous Ac Induction MotorThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16 42 Mm Brushless Dc Planetary Gear Motors With Custom 24 V And Encoder OptionsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
60# 200W 48 VDC Ball-Screw Brushless Servo MotorRequest Quote
15 kW Permanent Magnet Synchronous Motor, 380–440 V, VFD DriveRequest Quote
AC 220V Servo Motor Series, 0.2–0.6 kW, 3000 rpmRequest Quote
750 W 220 V AC Servo Motor for CNC Machines, 3000 rpm, Model 60SV750AA30ARequest Quote
Industrial Door C90 Servo Motor and Control System, 1100 W, 90 N·mRequest Quote
40–130 mm AC Servo Motor Kit with Worm Gearbox and DriverRequest QuoteTransourceHub related sourcing paths
TransourceHub procurement phrases
TransourceHub related product samples
: 1. The planetary gear reducer adopts modular design and can be changed and combined according to customer requirements...
Servo Motors Planetary Gearbox Reducer Drive for Stepper Motor Servo Motor Planetary Gear Motor. . Model NO. ZB 90 Layout Coaxial Hardness Hardened Tooth Surface Installation Vertical Type Step Single-Step Type Plan...
Servo Motors High Precision Planetary Gear Reducer for CNC Machines and Servo Motor Durable Zf40 Planetary Gearbo. . Model NO. 40 Layout Coaxial Hardness Hardened Tooth Surface Installation Vertical Type Step Single-Step Type Planeta...
Servo Motors High Precision Low Noise Zpf90 Planetary Gearbox Reducer for Stepper Motor or Servo Motor Helical Pa. . Model NO. 90 Layout Coaxial Hardness Hardened Tooth Surface Installation Vertical Type Step Single-Step Type Planeta...
Servo Motors Servo Power CableOver the years, we have consistently dedicated ourselves to delivering high-quality products and services that empower b...
Servo Motors Luchd-saothrachaidh is solaraichean giùlan motair - Factaraidh giùlan motair SìonaLuchd-saothrachaidh is solaraichean giùlan motair-Factaraidh giùlan motair Sìona Mu ar deidhinn Roinnean Bathar Toraidhe...