FD Slew Drive Gearbox with Motor for Solar Tracke | RFQ Sourcing Details
Motors And Drives · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Motors And Drives. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This FD slew drive gearbox with motor is intended for solar tracker systems and other energy-generation projects requiring slow, controlled rotary movement. The listed model is new, self-locking, and rated for 4.5 k. Nm output torque, with a maximum output torque of 5.8 k. Nm and holding torque of 31 k. Nm.
Its stated rated output speed is 0.025 rpm, the listed ratio range is 60 to 94.73, and the protection grade is IP65. The FD-V series description identifies a compact design intended to simplify installation. It includes a built-in mechanical limiter and uses a double-enveloping worm profile to improve .
The series is described as suitable for single-axis tracking systems driven from one point. Series-level data lists rated output torque options from 1 to 8 k. Nm, maximum output torque from 1.3 to 10.3 k. Nm, and holding torque from 8 to 50 k. Nm, depending on size and configuration.
The housing or wheel is listed as QT600 cast iron, while the worm shaft is listed as 20. CrMn. Ti. Efficiency is stated as 35% in the basic product overview and 35–40% depending on ratio in the FD-V series description.
Temperature information also differs between the overview and series data: the overview lists an ambient range of -30 to +65°C, while the FD-V description lists -35 to 70°C. Buyers should therefore confirm which ratings apply to the exact selected model. Customization is listed as available.
Before ordering, confirm the required FD series and size, motor electrical details, mounting interface, output orientation, gear ratio, torque duty cycle, tracking accuracy, operating temperature, corrosion-protection requirements, and whether the mechanical limiter is included in the proposed configuration.
Buyers should also request an approved dimensional drawing and verify that all rated, maximum, holding, and breaking torque values correspond to the offered model rather than the broader series range.
FD | Applications and Buyer Notes
FD is organized as a sourcing-ready Motors And Drives reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions be
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Motors and DrivesBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- FDBased on visible page data; confirm exact value in the RFQ.
- Ratio
- 60 to 94.73Based on visible page data; confirm exact value in the RFQ.
- Condition
- NewBased on visible page data; confirm exact value in the RFQ.
- Efficiency
- 35%;FD-V series description states 35–40% depending on ratioBased on visible page data; confirm exact value in the RFQ.
- Worm shaft
- 20CrMnTiBased on visible page data; confirm exact value in the RFQ.
- Application
- Solar tracker system;light industryBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 12v 24v Permanent Magnet Worm Gear Dc Motor 10 300 RpmThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Motors And Drives categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Bearings And Linear Motion categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Couplings Chains And Belts categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Gearboxes And Reducers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Gearbox Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Motor Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 15 Kw 20 Hp Three Phase Squirrel Cage Asynchronous Ac MotorThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Linear Motion Parts Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 15 Kw Permanent Magnet Synchronous Motor 380 440 V Vfd DriveThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16 42 Mm Brushless Dc Planetary Gear Motors With Custom 24 V And Encoder OptionsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
VH7-60S92-RC- Single-Axis Solar Tracker Slewing Drive Gear MotorRequest Quote
SC9-61-RC 24VDC Worm-Gear Slewing Drive for Solar TrackersRequest Quote
Single-Worm Slewing Drive with Hydraulic Motor for Jacking EquipmentRequest Quote
SDE3, SDE7 and SDE17 Dual-Axis Worm Slew Drives with 24 VDC MotorsRequest Quote
Coresun SVH3-62B-RC-24H3033 Dual-Axis Slewing Drive with 24 VDC MotorRequest Quote
S20 Automatic Sliding Door Drive with Dunker MotorRequest QuoteTransourceHub related sourcing paths
TransourceHub procurement phrases
TransourceHub related product samples
Functional Role in Industrial Automation The KC Series helical geared motor is engineered for heavy-duty industrial appl...
Industrial Motors and Drives RV Series Chinese Industrial Mechanical Power Aluminum Cast Marine Transmission Speed Reducer Worm G. Overview After Sales Service FAQ Overview . Model NO. RV030-150 Installation Vertical Type Layout Coaxial Step Single-...
Industrial Motors and Drives Luchd-saothrachaidh is solaraichean giùlan motair - Factaraidh giùlan motair SìonaLuchd-saothrachaidh is solaraichean giùlan motair-Factaraidh giùlan motair Sìona Mu ar deidhinn Roinnean Bathar Toraidhe...
Industrial Motors and Drives Abakhiqizi Nabahlinzeki Bezimoto Ezithwala Izimoto - Ifektri Yezimoto Ezithwala Izimoto ZaseChinaAbakhiqizi Nabahlinzeki Bezimoto Ezithwala Izimoto-Ifektri Yezimoto Ezithwala Izimoto ZaseChina Mayelana NATHI Izigaba Z...
Industrial Motors and Drives Fabricantes e provedores de rodamentos de motor - Fábrica de rodamentos de motor de ChinaFabricantes e provedores de rodamentos de motor-Fábrica de rodamentos de motor de China Sobre nós Categorías de produtos...
Industrial Motors and Drives Kamupani Gaosi ma Sapalai o le U'amea afi - Saina Falegaosimea o le U'amea afiKamupani Gaosi ma Sapalai o le U'amea afi-Saina Falegaosimea o le U'amea afi Faatatau ia tatou Vaega o Oloa Oloa Fa'apit...