BS-16A030 16 mm Brush DC Gear Motor with Configur | RFQ Sourcing Details
Dc Gear Motors · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Dc Gear Motors. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The BS-16A030 is a compact brush-type DC gear motor intended for control and driving functions. Its published envelope is 16 mm in diameter with listed dimensions of 16 × 15.5 × 18.6 mm, maximum end play of 0.5 mm, and an operating-temperature range of -10 to +60°C.
Shaft length and D-shaped shaft dimensions can be customized. Available gearbox configurations cover several reduction ratios. Listed options range from 1/13 and 1/16 with an 11 mm gearbox to ratios as high as 1/592, 1/825, and 1/1021 with a 17 mm gearbox.
Because motor speed, torque, current, voltage range, and overall length vary by configuration, buyers should identify the exact ratio and model code required. One published 6 V reference condition uses a 14 mm gearbox and a 100:1 reduction ratio.
After a 30-second run-in, its listed no-load performance is 146.3 rpm ±12% at 0.084 A, with 0.17 A maximum. Listed on-load performance is 0.28 kg·cm torque, 126.5 rpm ±12%, and 0.18 A current, with 0.27 A maximum.
Rotation is counterclockwise when viewed from the output-shaft end with positive voltage applied to the positive terminal. These figures are reference data for that stated configuration and measurement condition, not universal values for every available ratio.
Additional listed variants demonstrate the configuration range: a 1/14.4, 6 V model is rated at 805 rpm no-load and 610 rpm on-load;a 1/225, 6 V model is listed at 51 rpm no-load and 42 rpm on-load;and a 1/562, 3.7 V model is listed at 31 rpm no-load and 25 rpm on-load.
The available table also includes operating ranges from 4-6 V, 4-8 V, and 6-12 V depending on the exact model.
Before ordering, confirm the complete model number, nominal and allowable voltage, reduction ratio, gearbox length, output-shaft geometry, rotation direction, required torque and speed under the actual load, current limits, connector or terminal arrangement, and dimensional drawing.
Buyers should also request configuration-specific test data rather than applying the 6 V reference figures to a different voltage or gear ratio.
BS-16A030 | Applications and Buyer Notes
BS-16A030 is organized as a sourcing-ready Dc Gear Motors reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time question
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- DC Gear MotorsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- BS-16A030Based on visible page data; confirm exact value in the RFQ.
- Structure
- 10-pole, shunt excitationBased on visible page data; confirm exact value in the RFQ.
- Motor type
- Brush-type DC gear motorBased on visible page data; confirm exact value in the RFQ.
- Listed size
- 16 × 15.5 × 18.6 mm;16 mm diameterBased on visible page data; confirm exact value in the RFQ.
- Gearbox lengths
- 11, 12.5, 14, 15.5, or 17 mm, depending on reduction ratioBased on visible page data; confirm exact value in the RFQ.
- Maximum end play
- 0.5 mmBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 15 Kw 20 Hp Three Phase Squirrel Cage Asynchronous Ac MotorThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Bearings And Linear Motion categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Couplings Chains And Belts categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Gearboxes And Reducers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Motors And Drives categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Gearbox Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16mm High Precision Small Planetary Gearbox For Brushed Brushless Stepper Motors Gear Motor And ElThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Motor Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Linear Motion Parts Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 280 Kw Three Phase Squirrel Cage Asynchronous Ac Induction MotorThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16 42 Mm Brushless Dc Planetary Gear Motors With Custom 24 V And Encoder OptionsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
16–42 mm Brushless DC Planetary Gear Motors with Custom 24 V and Encoder OptionsRequest Quote
42 mm 12V/24V Brushless DC Planetary Gear Motor with Custom Speed and Output ShaftRequest Quote
D42BLF 24V 42mm 3-Phase Brushless DC Planetary Gear MotorRequest Quote
D63 Brushed Permanent-Magnet DC Worm Gear Motor with Adjustable SpeedRequest Quote
GB-3045-10 Adjustable-Speed 12V/24V Brushed Worm Gear DC Motor with Brake and Dual Hall SensorRequest Quote
JK-4128-024 Adjustable-Speed DC Brushed Worm Gear Motor for 6000–8000 N Push-Rod SystemsRequest QuoteTransourceHub related sourcing paths
TransourceHub procurement phrases
TransourceHub related product samples
Functional Role in Industrial Automation The KC Series helical geared motor is engineered for heavy-duty industrial appl...
Industrial Motors and Drives RV Series Chinese Industrial Mechanical Power Aluminum Cast Marine Transmission Speed Reducer Worm G. Overview After Sales Service FAQ Overview . Model NO. RV030-150 Installation Vertical Type Layout Coaxial Step Single-...
Industrial Motors and Drives Luchd-saothrachaidh is solaraichean giùlan motair - Factaraidh giùlan motair SìonaLuchd-saothrachaidh is solaraichean giùlan motair-Factaraidh giùlan motair Sìona Mu ar deidhinn Roinnean Bathar Toraidhe...
Industrial Motors and Drives Abakhiqizi Nabahlinzeki Bezimoto Ezithwala Izimoto - Ifektri Yezimoto Ezithwala Izimoto ZaseChinaAbakhiqizi Nabahlinzeki Bezimoto Ezithwala Izimoto-Ifektri Yezimoto Ezithwala Izimoto ZaseChina Mayelana NATHI Izigaba Z...
Industrial Motors and Drives Fabricantes e provedores de rodamentos de motor - Fábrica de rodamentos de motor de ChinaFabricantes e provedores de rodamentos de motor-Fábrica de rodamentos de motor de China Sobre nós Categorías de produtos...
Industrial Motors and Drives Kamupani Gaosi ma Sapalai o le U'amea afi - Saina Falegaosimea o le U'amea afiKamupani Gaosi ma Sapalai o le U'amea afi-Saina Falegaosimea o le U'amea afi Faatatau ia tatou Vaega o Oloa Oloa Fa'apit...